top of page
  • info0169064

How do I pack electronics RIGHT?

In this quick moving blog, we'll go over how to pack your valuable electronics correctly. We know they can be very fragile and delicate, so it's important to get it right the first time. Nobody wants a smashed up Macbook by the time they reach their new home.

Almost all of your equipment will benefit from following these 3 rules.

  • Static electricity is a danger to electronics, especially anything with a microchip. To protect your devices from harm, use antistatic bubblewrap/bubbles or popcorn. If you don't have any of these, you may ask your movers for it, or you can order it online or from an electronics store.

  • If you still have your equipment's manufacturer's or user's manual, consult it for specific instructions on how to move it. Alternatively, look for user instructions on the manufacturer's website.

  • When dismantling electronic items with complicated wiring, it's a good idea to mark wires and sketch a schematic as you go. This will make reassembling the item much easier.

2. Taking Care of Your Flat-Screen Television

When you're packing your flat screen TV for a move, the easiest choice is to repackage it inside the box it came in. However, not everyone has the space to save the original boxes. Another alternative is to buy specialised crates intended exclusively for transferring electronics. The third and most straightforward approach is to arrange your television as follows:

  • Wrap a microfiber towel or blanket around your television and tape it shut. This safeguards your television and guarantees that the screen is not scratched (warning: some delicate textiles might scratch).

  • Wrap a couple layers of antistatic bubble wrap around the box and seal it to ensure adequate protection. Using a box or thick sheets of cardboard can keep it safe during the removal procedure.

  • Flat-screen televisions aren't particularly hefty, but they may be unwieldy. To avoid it being dropped, the TV should be carried by two persons and then placed in a secure spot within the vehicle. Place it on top of anything that will absorb the shocks of travelling over bumpy roads, such as a thick, cushiony moving blanket.

  • All flat-screen televisions must remain upright. If you lay it flat, you're putting the screen at more risk. You must also ensure that it does not tip over.

3. Putting Together Your Sound System

Whether you have a huge and intricate surround sound system or a basic one-unit piece of equipment, the methods are the same.

  • Repackaging your sound system in its original packing or within specialised electronics boxes, which are very expensive to acquire, is preferable, as it is with your other fragile gadgets. Even if you choose one of these packaging methods, make sure the sound system is firmly wrapped in layers of antistatic bubble wrap. Here's how to securely transport your sound system:

  • Unplug all outlets and coil all wires neatly, tying them together with twine, rubber bands, or zip ties. Tape them to the unit to keep them from falling off.

  • Secure the sound system with tape after wrapping it in several layers of antistatic bubble wrap.

  • To give extra cushioning during the relocation, pack the unit inside the designated box and cover it in newspaper or normal bubblewrap.

  • Close the box lid and tape it securely. This box should be clearly labelled so that everyone working with your house relocation is aware that the contents are delicate.

4. Getting Your Computer Ready

If you need to follow any particular packaging instructions, see the user guide that came with the computer.

  • Ink cartridges should be removed from printers before packaging. Before packing, it's common practise to remove all CDs, DVDs, and other storage media from PCs.

  • To ensure that your computer is safely kept and transferred to your new house, use the following packaging method:

  • Use a double-walled box for extra protection when packing if you don't have the original box for your unit.

  • Mark each wire and its appropriate port on the computer with labels or tags so you can quickly attach it when you get to your new home. Creating a graphic or written instructions outlining how you disconnected the PC could also be beneficial.

  • Disconnect each component of the computer and wrap it in antistatic bubble wrap separately.

  • Line the bottom of your box with a thick layer of bubblewrap or popcorn, then carefully position the computer parts inside, starting with the heaviest at the bottom and filling all gaps with wrapping to ensure the parts are well secured.

  • To ensure that the box is treated with care during removal, seal it and add a label.

  • Carefully packing your electronic equipment and labelling boxes should ensure that your belongings arrive securely at your new house. If you're using professional movers, let them aware of your fragile items so they can take extra precautions. You should be able to easily connect anything in your new home if you've followed the directions.

If you follow some of these directions properly, this should ensure a safe and secure move for your electronics. For more tips and tricks, visit your team at #friendlycitymovers

Movers, Moving, Moving Company, Movers Woodstock, Moving Company Woodstock, Movers Oxford County, Moving Company ingersoll, Movers Ingersoll, Movers thamesford, Moving Company Thamesford, Movers London, Moving Company London, Movers Brantford, Moving Company Brantford, Moving Company Guelph, Movers Cambridge, Moving Company Cambridge, Moving, Tillson burgmovers, moving tillsonburg, moving company tillsonburg, local movers tillsonburg, top movers tillsonburg, tillsonburg moving, movers simcoe moving company simcoe movers ayr movers delhi delhi movers local movers local moving movers dorchester dorchester movers ingersoll movers movers ingersoll norwich movers movers norwich long haul movers long haul long distance movers long haul moving long distance moving

4 views0 comments

Recent Posts

See All


Post: Blog2_Post
bottom of page